This website uses cookies to deliver the best possible user experience. See our Privacy Policy for more information.

PORTABLE

Kenwood TK2000-3000

Kenwood TK2000-3000

Lightweight

Compact design

Rapid charger

Great battery life – (1100mAh) Li-ion battery

Kenwood TK2000-3000 - Spec Sheet

Description

  • Frequency Range: 136-174 MHz
  • 16 Channels
  • 5 Watt RF Output
  • Internal VOX Function with 10 levels
  • QT and DQT Signalling, plus DTMF Encode
  • Supplied with KRA-26M Antenna, KNB-63L Li-Ion Battery and KSC-35 Rapid Battery Charger
  • Note – does not include any voice scrambler function, making it ideal for use in countries where scramblers are banned
Kenwood TK-2317-3317

Kenwood TK-2317-3317

The new TK-2317/3317 is thin and compact yet packed with features for intuitive operation, impressive performance, and all-weather reliability. Front and side programmable function keys allow for customized convenience, and KENWOOD’s renowned audio clarity means the message gets through loud and clear.

Kenwood TK-2317-3317 - Spec Sheet

Description

-5Watt VHF and UHF Models
-Wide Band Coverage
136-174MHz Model
400-470MHz Model
450-520MHz Model
-128 Channels / 128 Zones
-GPS Connectivity (Combined with the optional KMC-48GPS Speaker Mic)
-9 PF KEYS Type and 6PF KEYS+12KEYPAD Type
-8Character, 13Segment Backlit LCD
-4Color LED Indicator (Red/Orange/Green/Blue)
-Programmable Voice Inversion Scrambler
-QT / DQT / DTMF Signaling
-FleetSync® PTT ID, SelCall
-2-tone (encode/decode)
-Built-in MDC-1200 Signaling
-Emergency Function
-IP54/55 Dust & Water Resistant
-MIL-STD 810 C/D/E/F/G environmental standards, including "blowing rain"
-Clear & Crisp, Enhanced Audio
-Radio stun
-Priority scan
-Channel / Zone delete & add
-Compander / VOX /Scrambler setting per channel
-VOX Ready
-Self-programming mode
-Compatible with TK-2212/3212 batteries

Kenwood TK D240-D340

Kenwood TK D240-D340

Ergonomically styled yet tough enough to comply with both MIL-STD and IP54/55 environmental standards, these portables provide the features and performance needed for a wide range of workplaces – from warehouses and stations to shops and hotels. As well as handling both analogue and digital communications, these user-friendly DMR radios can even operate in direct mode, without a repeater.

Kenwood TK D240-D340 - Spec Sheet

Description

Two-slot TDMA
Belonging to the DMR Tier II category, which covers licensed conventional systems, these radios are specified for 2-slot Time Division Multiple Access (TDMA) operation in 12.5 kHz channels. This means they can offer greater spectrum efficiency.
Two-in-One – Digital & Analogue
These DMR radios can operate in both digital and FM analogue modes, switching automatically as needed. Interoperability with legacy analogue radios allows organizations to migrate to full digital at their own pace.
Dual-slot Direct Mode
Up to two simultaneous subscriber calls can be supported in a 12.5 kHz channel, without requiring a base station or repeater, thus doubling channel capacity.
Call Interruption
In an emergency or whenever a user needs to interrupt a call, Call Interruption is available in both direct and repeater modes, while encoding or decoding. There is also a Lone Worker function to protect employees working alone.
Tough All-terrain
These portable radios conform to MIL-STD C/D/E/F/G standards for ruggedness and are IP54/55 rated for water & dust intrusion, making them more than capable of withstanding harsh operating conditions.
Longer Battery Life
Battery life is always important for radio users. Both Lithium-ion and Ni-MH rechargeable batteries are available. Regardless of battery type, operating hours are longer in digital mode.
Clear, Powerful Audio
A radio’s most important quality is clarity – being able to hear, loud and clear, what the other party is saying. And these portables deliver just that. For a start, there is 1 W of audio output power, while the AMBE+2TM VOCODER technology accurately replicates natural human speech nuances for superior voice quality, even with high levels of ambient noise. Additionally, Voice Announcement can confirm the channel number, so there is no need to look at the display. English is the default language, but Spanish, French, German, Italian, Dutch and Russian are also available.
5-Tone Signalling
A series of programmed audio tones are used to specify one or more radios to initiate a conversation; all other radios will remain muted. Several standard signalling formats are available.
Slim Styling
Compact form with ergonomically stylish design makes these radios easy to grip and operate.
Other features

• Max. 32 ch in 2 zones (16 ch per zone)
• Wide 70 MHz UHF coverage
• Selectable 8- or 16-channel using channel stopper • 5/1 W (VHF), 4/1 W (UHF) output
• Audio output power 1 W @ 12 Ω
• Scanning functions
• Password protection (read/overwrite)
• Minimum volume setting
• Embedded message
• Selective call alert LED
• Key lock
• Late entry
• Analogue signalling: QT/DQT, FleetSync, 5-tone signalling
• Compander per channel • Squelch level

Kenwood NX220E-320E

Kenwood NX220E-320E

The Kenwood NX220E-320E Portable VHF and UHF 5 W radios deliver a full-featured digital portable radio solution to enterprise, local government and SMR subscribers. The latest NEXEDGE® portables boast a newly designed ultra-compact platform with all of the high-performance RF specifications and MILSTD 810 & IP54/55 ruggedness of Kenwood’s flagship NEXEDGE® models. These new models come in three user interface configurations, including the first NEXEDGE® non-display model for users that need a limited number of channels or trunked talk groups. True to NEXEDGE® multi-system migration-ready tradition – analog, NXDN® conventional, and NXDN® trunking are included in all models and include the latest V2.5 enhancements such as OTAP over-the-air programming and ground-breaking NEXEDGE® enhanced audio refinements.

Kenwood NX220E-320E - Spec Sheet

Description

General Features
General Features
• 5W (136-174 MHz)
• 5W (400-470, 450-520 MHz)
• 260 CH-GID / 128 Zones (LCD Models)
• 64 CH-GID / 4 Zones (Non Display)
• Single Zone / Multi-Zone / List Scan
• Single Priority Scan (Conventional)
• 12-Key Keypad Models
• 8 Character Alphanumeric Aliases
• Backlit LCD & Keys
• 16th-Position Selector Stop (see notes)
• 4 Front/3 Side PF Keys (Emergency/AUX)
• Built-in Motion Sensor
• 500 mW Speaker Audio
• Zone / Ch# Voice Announcement
• MIL-STD-810 C/D/E/F/G
• IP54/55 Water & Dust Intrusion
• 12.5 kHz Analog Channels
• 6.25 & 12.5 kHz NXDN® Channels
• Analog Conventional & LTR® Zones
• NXDN® Conventional & Conventional IP
• NXDN® Trunking & Multi-Site Networks
• AMBE+2™ VOCODER
• NXDN® Scrambler
• NEXEDGE® OTAP Included
• FleetSync®/II, MDC-1200, DTMF, QT/DQT & Two-Tone
• Voice Inversion Scrambler (16 Codes)

Kenwood TK2406-3406

Kenwood TK2406-3406

Kenwood TK2406-3406 Portable radios deliver performance, enhanced features such as scan, built-in VOX, a long battery life, as well as a sleek design.
Offering 5-watts of power and MIL-STD 810 & IP54/55 weatherproofing, these portables have been expertly engineered to perform in the toughest of environments.

Kenwood TK2406-3406 - Spec Sheet

 

Description

  • Frequency Range: 136-174 MHz
  • 16 Channels
  • 5 Watt RF Output
  • Internal VOX Function with 10 levels
  • Voice Annunciation of Channel Number (4 languages)
  • New 1 Watt BTL Audio Amplifier provides loud clear received audio even in noisy operating environments
  • GPS Compatible, with optional KMC-48GPS speaker/microphone
  • FleetSync plus DTMF, QT and DQT Signalling. MDC-1200 Signalling compatible
  • Supplied complete with Ni-MH Battery, Rapid Charger & Belt Clip – order choice of antenna separately
Kenwood NX200G-300G

Kenwood NX200G-300G

Despite their compact lightweight design, these handheld radios are fully equipped for both digital and analog operating modes. The clear backlit display and ergonomic layout of the controls enhance operating ease, while the rugged MIL-STD construction ensures all-weather reliability.

Kenwood-NX200G-300G - Spec Sheet

Description

MODELS
-  Model Type 1: 1 to 5 W (136-174 MHz)
-  Model Type 2: 1 to 5 W (400-470 MHz)
-  RF Power Output: 5 W/1 W
-  Channel/Zone Capability: 512 CH / 128 Zones
-  12-Key Keypad Model: Optional
KEYS & SWITCHES
-  Front Keys: 6 PF and Menu Keys
-  Side Keys: 2 PF Keys
-  Emergency/AUX Key: Yes
-  On/Off Volume Knob: Yes
GENERAL FEATURES & PROGRAMMING
-  Built-in GPS Receiver Model: NX-200G/NX-300G
-  Function/Status LCD Icons: Yes
-  Alphanumeric Aliases: 14 Character
-  LCD Battery Status Indicator: Yes
-  Low Battery Alert: Yes
-  Battery Saver (NA in Scan or Trunking): Yes
-  Date, 12/24 Hour Clock: Yes
-  Intrinsically Safe Option: Yes
-  Dimensions (W x H x D) - Radio Only: 58 x 127.5 x 41.3mm
-  Weight (net) - Radio Only: 250g
-  Kenwood LTR Features: Yes
-  800 MHz: -
EMERGENCY & SAFETY FEATURES
-  MIL-STD: MIL-STD-810 C/D/E/F/G
-  IP-54/55 Water and Dust Intrusion: Yes
-  Immersion Option: -
DIGITAL
-  NXDN: Yes
-  P25: Optional
FleetSync®/II (FM) -  FleetSync Capable: Yes

Kenwood NX-240-340

Kenwood NX-240-340

Your business will have to adopt digital radios sooner or later, you know that, but you probably wonder when to make the extra investment. A leap into the unknown?? Not with the new NEXEDGE NX--2240/3340. It operates in both analog FM and NXDN digital modes, offering a cost-effective way to migrate smoothly from legacy systems while discovering the benefits of advanced digital technology – including increased effective coverage area, low noise for superior clarity, and inherent secured voice. All this comes in a tough, compact radio that is easy to operate, delivers high-powered audio, and ensures round-the-clock reliability. Don’t delay the opportunity to expand the potential of your business.

Kenwood NX-240/340 - Spec Sheet

Description

DIGITAL: • Over-The-Air Alias (TX only) • Paging Call • Individual Call & Conference Group Call • Status Messaging • Remote Monitor • Site Roaming • Late Entry • NXDN® ESN
ANALOG: • FleetSync®, MDC-1200, DTMF • QT/DQT/2-tone • Compander • Squelch Level 
GENERAL: • Multiple Scan • 4-Color LED (Blue / Red / Green / Orange) • 2 PF Keys • 16-Position Mechanical Selector • Zone / Channel Number Voice Announcement • VOX Ready • Emergency Call • Remote Stun/Kill • Lone Worker Alert (per channel) • Time Out Timer • Busy Channel Lockout • Low Battery Warning • Battery Saver • KPG-169D Windows® FPU • Wireless Cloning • Password Protection • PTT Release Tone • Minimum Volume • Mic Sense • MIL-STD-810 C/D/E/F/G • IP54/55 Water & Dust Intrusion

MOBILE

Kenwood TK7302-8302 Mobile

Kenwood TK7302-8302 Mobile

The Kenwood TK7302-8302 Mobile delivers reliable mobile performance with extra wideband coverage (UHF:70MHz) and such features as QT/DQT signalling, multiple scan functions and a voice inversion scrambler. Yet this tough IP54/ MIL-STD-compliant radio is decidedly user-friendly, providing high-quality audio, voice announcement, and a large display with adjustable brightness for simple operation, day and night.

Kenwood TK7302-8302 - Spec Sheet

Description

16 CHANNELS, 2 ZONES

The Kenwood TK7302-8302 Mobile offers ample capacity for multiple channels and radio systems:16 channels and 2 zones.And once it is programmed, users can select specific channels within a set range.

ENHANCED KENWOOD AUDIO

Clear audio means confident communications, but power output is not the only factor that determines how easy it is to use a radio in varying noisy environments.As an audio specialist experienced in psychoacoustics,Kenwood can draw on decades of expertise at every step:component selection, construction,optimization,evaluation and analysis.The resulting audio performance – specially engineered for transceivers and with frequency response optimized for the human voice – is undeniably clearer and crisper.

EXTERNAL D-SUB 15-PIN INTERFACE

A D-sub 15-pin terminal enables the simple connection of various types of external equipment.It can be used for Ignition sense,External Switch, Horn Alert,and External Mic, among others.A Molex interface is also available with the optional KCT-60M cable.

MULTIPLE SIGNALING

❚ QT/DQT/DTMF Encoder/decoder function uses QT/DQT to segregate talk groups, so users only hear calls from their own group. DTMF PTT ID is included for dispatch operations or for a simple remote control application.

❚ FleetSync® PTT ID, SelCall & Status Utilizing Kenwood’s FleetSync® signaling protocol,the TK-7302/8302 has PTT ID (ANI:automatic number identification) and Selective Calling capabilities for managed dispatch operations.Programmed Status (by FPU) can also be sent.

❚ 2-tone (encode/decode) The 2-tone signaling format is provided for use with the most common radio systems.

❚ MDC-1200 signaling Built-in MDC signaling means the following features are available: • PTT ID Encode • Emergency Encode • Stun/Revive Decode • Radio Check Decode

❚ Emergency alert For hazardous/hostile duty environments,a PF key can be programmed for emergency use to alert the dispatcher or other group members via DTMF, FleetSync® or MDC-1200 signaling.

PROGRAMMABLE VOICE INVERSION SCRAMBLER

*1 The built-in programmable voice inversion scrambler provides basic protection against casual eavesdropping. It is possible to have a unique scrambler setting for each channel by picking the voice inversion frequency from one of 16 tables.
PROGRAMMABLE BLUE LED

The blue LED indicator can be customized to provide useful status information. For example, it can be used in combination with the orange LED for Selective Call differentiation. GPS FEATURE Connected to an external GPS receiver, the Kenwood TK7302-8302 Mobile can transmit accurate vehicle location data to the central base station for fleet management purposes. Designated scrambler and GPS modules can be installed internally.

Kenwood NX 720-820 Mobile

Kenwood NX 720-820 Mobile

Up to 50 Watts
IP 54 Rating
6.25 & 12.5 kHz Channels
Over-the- Air Alias

Kenwood NX 720-820 - Spec Sheet

Description

GENERAL FEATURES
• 25 W (136-174 MHz) Models
• 25 W (400-470 MHz) Models
• Meets ETSI EN Standards
• 260 CH-GID / 128 Zones
• 10 Character Alphanumeric Aliases
• Backlit LCD & Keys
• Function/Status LCD Icons
• Transmit/Busy/Call Alert/Warn LED
• Blue Function/Status LED
• On/Off Power Control
• 4 Up/Down Selectors
• 6 Front PF Keys
• Emergency/AUX Key
• 4W Speaker Audio
• Zone/CH Number Voice Announcement
• DB-15 Accessory Connector
• 6 Programmable AUX I/Os
• KPG-141D Windows® FPU
• Flash Firmware Upgrading
• MIL-STD-810 C/D/E/F/G
• IP54 Water & Dust Intrusion
• PC Serial Interface
• SDM Manual Input*1
• Transparent Data Mode*1
• Built-in GPS Receiver Models Available (Optional KRA-40G GPS Active Antenna required for GPS functions)
DIGITAL – GENERAL
• NXDN® Digital Air Interface
• AMBE+2™ VOCODER
• 6.25 & 12.5 kHz Channels
• Over-the-Air Alias
• Over-the-Air Programming*2
• Paging Call
• Emergency Call
• All Group Call
• Status Messaging*1
• Remote Stun/Kill*1
• Remote Check*1
• Short & Long Data Messages*1
• GPS Location with Voice*1
• NXDN® Scrambler Included
DIGITAL CONVENTIONAL MODE
• 64 Radio Access Numbers (RAN)
• Individual & Group Selective Call
• Mixed FM/Digital Operation
• Conventional IP Networks
• Site Roaming
DIGITAL TRUNKING MODE
• Individual Private Call
• Group Call & Broadcast Call
• Telephone Interconnect*3
• Transmission Trunked Mode*3
• Message Trunked Mode*3
• Call Queuing with Priority*3
• Late Entry (UID & GID)*3
• 4 Priority Monitor ID’s*3
• Remote Group Add*1
• Failsoft Mode
MULTI-SITE IP NETWORK COMPATIBLE
• 60,000 GIDs / UIDs
• Wide Area Group Call
• Auto Roaming Registration
• Group Registration
SCAN
• Single Zone / Multi-Zone / List Scan
• Single Priority Scan (Conventional)
FM MODES – GENERAL
• 25, 20 & 12.5 kHz Channels
• Conventional & LTR® Zones
• FleetSync®/II, MDC-1200, DTMF
• QT / DQT & 2-Tone (Conventional Zones Only)
• 5-Tone Encode / Decode (Conventional Zones Only)
• Voice Inversion Scrambler (16 Codes)
FleetSync®/II (FM)
• PTT ID ANI / Caller ID
• Selective / Group Call
• Emergency, Status & Test Messages*1
MDC-1200
• PTT ID ANI / Caller ID*3
• Emergency, Radio Check & Inhibit

Kenwood NX-5700B-5800B

Kenwood NX-5700B-5800B

Thanks to multi-digital operation, NEXEDGE® offers a flexible communications system that is ideal for a wide range of industries and fields - ranging from utilities and traffic agencies to schools, taxi services and security companies. What's more, top-of-the-line features such as the transflective display for easy viewing in the sunshine, GPS capability and Bluetooth ® connectivity all contribute to enhanced efficiency and cost-effectiveness. From top to bottom, the NX-5000 Series means business.

Kenwood NX-5700B-5800B Spec Sheet

Description

5 W - 50 W (136-174 MHz) Models
5 W - 45 W (380-470, 450-520 MHz) Models
Maximum of 4,000 CH/Radio capacity, 512 CH/Zone, 128 Zones
DB-25 Accessory Connector
4 W Speaker Audio
Multi-Protocol operation in P25 (Phase I&II), NXDN® protocols
Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
Large, Color 2.55" (154 x 422 pixels) TFT Display for at-a-glance operational status checking
Easy to follow GUI and Multi-line Text to convey more information
Dual Remote Control Head Option and Multi-Band (Multi RF Deck) Control Option providing scalable configurations for various operations and applications

Built-In GPS Receiver/Antenna for effective fleet management
Bluetooth® Module built-in for hands-free operation
Active Noise Reduction (ANR) utilizing built-in DSP for suppression of ambient noise
Renowned KENWOOD Digital Audio Quality
Built-in 56-bit DES Encryption
Optional 256-bit AES Encryption
microSD/microSDHC Memory Card Slot for increased memory capacity for "Voice & Data"
IP54/55 and MIL-STD-810 C/D/E/F/G

 

Kenwood TK-7360H-8360H

Kenwood TK-7360H-8360H

KENWOOD’s 360-Series mobile radios offer our customers a total package of price, performance and features in an exciting new compact mobile platform. These KENWOOD models are engineered for UHF or VHF conventional operation. With sleek styling, refined operator controls, scores of features, and KENWOOD’s signature audio all at a remarkable price, 360 Series mobiles are the perfect combination of quality, style, sound and value.

Kenwood TK-7360H-8360H Spec Sheet

Description

• 10-Character Alphanumeric Aliases
• Power On, Reading and Writing password.
• Voice Inversion Scrambler Built-In
• PTT-ID Pause: avoids PTT-ID sending over a determined time.
• Single Priority Scan
• Lone Worker.
• Accessory connector D-SUB 15 port high density.
• 10 Programmable Function Keys.

Kenwood TK-D740-D840

Kenwood TK-D740-D840

Introducing the new TK-D740V/D840U mobiles, launched together with the new TK-D240V/D340U portables and completing KENWOOD’s impressive DMR system line-up. Thanks to compliance with MIL-STD and IP54 environmental standards, they can be relied on through thick and thin. As well as handling both analog and digital communications, these user-friendly DMR radios can even operate in direct mode, without a repeater. They also offer KENWOOD Call Interrupt and also benefit in having KENWOOD enhanced audio quality. These truly resourceful team members will enable you to make the most of your legacy analog equipment while also benefitting from digital communications.

Kenwood TK-D740-D840 Spec Sheet

Description

 Max. 32 ch in 2 zones (16 ch per zone)
• Wide 70 MHz UHF coverage
• External D-sub 15-pin (DE-15) interface
• External speaker connector (3.5 mm diameter phone jack)
• Audio output power 4 W @ 4 Ω
• GPS connectivity (available later)
• Single zone and Normal scanning functions
• Horn alert/P.A. function
• Ignition sensing
• Password protection (read/overwrite)
• Minimum volume setting
• Embedded message
• Selective call alert LED
• Late entry
• Analog signalling: QT/DQT, FleetSync, 2-tone (available later)
• Compander per channel
• Squelch level

Kenwood NX-5700B-5800B

Kenwood NX-5700B-5800B

Thanks to the multi-digital operation, NEXEDGE® offers a flexible communications system that is ideal for a wide range of industries and fields - ranging from utilities and traffic agencies to schools, taxi services and security companies. What's more, top-of-the-line features such as the transflective display for easy viewing in the sunshine, GPS capability and Bluetooth ® connectivity all contribute to enhanced efficiency and cost-effectiveness. From top to bottom, the NX-5000 Series means business.

Kenwood NX-5700B-5800B Spec Sheet

Description

5 W - 50 W (136-174 MHz) Models
5 W - 45 W (380-470, 450-520 MHz) Models
Maximum of 4,000 CH/Radio capacity, 512 CH/Zone, 128 Zones
DB-25 Accessory Connector
4 W Speaker Audio
Multi-Protocol operation in P25 (Phase I&II), NXDN® protocols
Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
Large, Color 2.55" (154 x 422 pixels) TFT Display for at-a-glance operational status checking
Easy to follow GUI and Multi-line Text to convey more information
Dual Remote Control Head Option and Multi-Band (Multi RF Deck) Control Option providing scalable configurations for various operations and applications
Built-In GPS Receiver/Antenna for effective fleet management
Bluetooth® Module built-in for hands-free operation
Active Noise Reduction (ANR) utilizing built-in DSP for suppression of ambient noise
Renowned KENWOOD Digital Audio Quality
Built-in 56-bit DES Encryption
Optional 256-bit AES Encryption
microSD/microSDHC Memory Card Slot for increased memory capacity for "Voice & Data"
IP54/55 and MIL-STD-810 C/D/E/F/G

Kenwood NX-740HV-840HU

Kenwood NX-740HV-840HU

The high-power NX-740H/840H offers increased effective coverage area, low noise for superior clarity, and inherent secured voice.

NEXEDGE® is Kenwood's innovative digital radio system, designed to meet the highest demands of today's radio system environment and to provide users with a multitude of NEXEDGE®-abilities to transform their demanding daily operations. Designed on a new NEXEDGE® platform featuring proven NXDN™ technology with affordability for every budget. These new NEXEDGE® mobiles come standard with a host of features sure to exceed the needs of many demanding applications and is the ideal
analog to digital migration choice utilizing true 6.25 kHz technology providing the important elements of design, features, reliability and overall value.

Kenwood NX-740HV-840HU Spec Sheet

Description

50 W (136-174 MHz) Model
45 W (450-520 MHz) Model
Max. 16 CH per Zone
2 Conventional Zones
2-Digit LED Channel Display
Function/Status LED Dots
Backlit Keys
Transmit /Busy / Call Alert LED
Blue Function/Status LED
9 Programmable Function Keys
Emergency / AUX Key
4W Speaker Audio
Voice CH# Announcement
DB15 Accessory Interface
8 Programmable I/O Ports
KPG-175D Windows®: FPU
MIL-STD-810 C/D/E/F
IP-54 Water & Dust Intrusion
PC Serial Interface
GPS Receiver Option

Kenwood NX-3720HG-3820HG

Kenwood NX-3720HG-3820HG

This adaptable mobile radio supports both NXDN and DMR digital protocols as well as mixed digital   FM analog operation, enabling it to serve with distinction in a wide range of enterprise- and operation-critical applications. Designed with flexibility in mind, it’s packed with convenient features like Bluetooth® for hands-free operation and built-in GPS. And providing greater freedom of installation, the radio’s front panel can be used as a remote control head (this requires an optional upgrade, to be available in future). Additionally, for expansion capability, a software license certification system facilitates extensive customization.

Kenwood NX-3720HG-3820HG Spec Sheet

Description

1-25 W (217-270 Mhz)

Remote Control Head Option

Backlit Dot Matrix LCD

Channels 32 Conventional, QT/DT encode and decode

Full MPT1327/1343 compatibility,multi-network capability

Function/Status LCD Icons

RSSI Indicator

Companded Audio, DTMF Encode

TX Power select, Programmable function keys

Large Dot Matrix LCD, Data Access Interface

Flash Memory, Compact versitile mounting

Public Address and Horn Alert

Encryption control, Password-protected prog.

MIL-STD Spec 810 C/D/E & F / MIL STD

IP-54/55Water & Dust Intrusion

Kenwood HF Transceiver TK-90

Kenwood HF Transceiver TK-90

Kenwood’s TK-90 is a high-performance HF Transceiver designed to provide user-friendly operation wherever and whenever you need reliable communications. The new, highly compact design, advanced features and remote control head option make it ideal for mobile and base station applications. Extremely small dimensions mean the TK-90 is transportable and installation-friendly for vehicles and base stations. The low-power settings facilitate battery- and solar-powered usage in the field. 300 memory channel capacity provides for custom operation and monitors frequency settings. Each channel has a programmable 12-character alphanumeric name for user-friendly channel selection via the backlit LCD. The KRK-5 Remote Control Head option makes vehicular installation in any type of vehicle possible. The control head can be mounted up to 7.6 meters from the transceiver unit mounted securely out of sight and out of the way under a seat, in the trunk or another compartment. This adaptable mobile radio supports both NXDN and DMR digital protocols as well as mixed digital   FM analog operation, enabling it to serve with distinction in a wide range of enterprise- and operation-critical applications. Designed with flexibility in mind, it’s packed with convenient features like Bluetooth® for hands-free operation and built-in GPS. And providing greater freedom of installation, the radio’s front panel can be used as a remote control head (this requires an optional upgrade, to be available in future). Additionally, for expansion capability, a software license certification system facilitates extensive customization.

Kenwood HF Transceiver TK-90 Spec Sheet

Description

LCD Brightness Control (HI/LOW/OFF)
Preferred & Normal Scan
Minimum Volume Settings
Direct Channel Access
Flash ROM Upgradeable
Frequency Direct Entry (KMC-32/36 required)
Ignition Sense (KCT-18/39 cables required)
Time-out Timer
Wired Channel Clone
Power-on Text
Receiver Pre-Amp & Attenuator
Noise Blanker
Clarifier
Front Panel Self Programming
Windows® PC Programming
PC Control (KCT-31 required)
VOX
VFO Mode

REPEATER

Kenwood NXR-5700-5800

Kenwood NXR-5700-5800

Kenwood NEXEDGE® NXDN™ digital two-way radio systems offer both Mixed Mode (the ability to communicate with both analogue and digital handsets automatically, without manual switching) for economical migration from analogue to digital and trunked radio communication capability.

Kenwood NXR-5700-5800 Spec Sheet

Description

NXDN Digital Air Interface
AMBE+2TM Vocoder for Natural Sounding Digital Voice
Mixed FM / Digital Operation
Autosenses Received Mode (Digital or Analogue)
Conventional IP Networks

Kenwood TKR-D710-810

Kenwood TKR-D710-810

TKR-D710/D810 repeater has a DMR Tier II compatible interface, 30 channel capacity, digital display and AIS IP console interface option available with the KTI-5 Interface Box installed and the appropriate IP Network Software.

Kenwood TKR D710-810 Spec Sheet

Description

GENERAL FEATURES
Mixed DMR (Tier II) Digital & FM Analog Operation
Conventional IP Network*1
DMR AIS IP console interface*1, *2

1 Requires Interface Box KTI-5 installed with the IP Network Software.
2 DMR AIS stands for Application Interface Standard, which is a voice/data communications protocol set by the DMR Association.

Kenwood NXR-710-810

Kenwood NXR-710-810

Kenwood NEXEDGE® NXDN™ digital two-way radio systems offer both Mixed Mode (the ability to communicate with both analogue and digital handsets automatically, without manual switching) for economical migration from analogue to digital and trunked radio communication capability.

Kenwood NXR-710K-810K Spec Sheet

Description

NXDN Digital Air Interface
AMBE+2 Vocoder for Natural Sounding Digital Voice
Operates in NXDN Digital Conventional and FM Analogue Modes, even on the same channel
Autosenses Received Mode (Digital or Analogue)
30 Channel Scanning Base Station (Conventional Mode)
Digital - Single-Site Trunking (future upgrade)
Multi-Site IP Network Mode (via KTI-3 option)

Copyright © 2019 Radio Trunk. All rights reserved.