This website uses cookies to deliver the best possible user experience. See our Privacy Policy for more information.

COMMERCIAL

PORTABLE - License Free

Icom IC-F4029 SDR

Icom IC-F4029 SDR

The IC-F4029SDR professional digital licence-free transceiver utilises the latest 6.25kHz ultra narrow digital voice technologies, providing digital clarity, razor-sharp signalling performance and a level of secrecy from less congested dedicated digital PMR channels.

Icom IC-F4029SDR - Spec Sheet

Description

A first in the market, professional digital licence free radio
A Path from analogue PMR 446 to digital PMR 446 in one unit
Fantastic audio quality
Useful communication tool for light commercial users (initial users can benefit from the security of digital voice)
Compact, lightweight body
High capacity lithium-Ion battery pack and rapid charger as standard
8-character alphanumeric display
32-status messages for digital PMR 446
“Common ID” group code
Existing analogue PMR 446 channels available with CTCSS/DTCS tones
Optional headset provides hands-free operation

Icom IC-F4029 SDR

Icom IC-F4029 SDR

The IC-F4029SDR professional digital licence-free transceiver utilises the latest 6.25kHz ultra narrow digital voice technologies, providing digital clarity, razor-sharp signalling performance and a level of secrecy from less congested dedicated digital PMR channels.

Icom IC-F4029SDR - Spec Sheet

Description

A first in the market, professional digital licence free radio
A Path from analogue PMR 446 to digital PMR 446 in one unit
Fantastic audio quality
Useful communication tool for light commercial users (initial users can benefit from the security of digital voice)
Compact, lightweight body
High capacity lithium-Ion battery pack and rapid charger as standard
8-character alphanumeric display
32-status messages for digital PMR 446
“Common ID” group code
Existing analogue PMR 446 channels available with CTCSS/DTCS tones
Optional headset provides hands-free operation

PORTABLE - Commercial

Icom IC-F51 V - IC-F61 V

Icom IC-F51 V - IC-F61 V

The ATEX versions of the IC-F51 and F61, conforms to the 94/9/EC ATEX Directive. The IC-F51 series is a waterproof PMR transceiver whose construction is equivalent to IPX7 which is the same rating as our marine handheld models. In addition, built-in signalling capabilities and UT-110 compatible voice scrambler function eliminate the need for an optional logic board. The IC-F51 series meets the requirements for a tough, waterproof communications tool for use in hazardous areas such as oil rigs, areas where flammable gases or liquids are used, and other potentially explosive environments. * Equivalent to IPX7 of the corresponding International Standard IEC 60529(2001). 1-metre depth for 30 minutes.

This ATEX approved IC-F51/F61 transceiver offers safety approved 2-way communication preventing explosion and fire hazard in specified hazardous areas.

Icom IC-F51 V, IC-F61 V - Spec Sheet

Description

- 12.5kHz channel step (VHF only)Wide/middle/narrow channel spacing
- Built-in compander (same as IC-F31G series and IC-F510 series)BIIS 1200 built-in
- SMA type ANT connector
- Up to 128 memory channels/8 memory banks
- MIL spec tested to MIL-STD F.

Icom IC-F326 DS - IC-F426 DS

Icom IC-F326 DS - IC-F426 DS

The IC-F3262D series provides protection against dust and water that is equivalent to IP67. The radio can withstand 1m depth of water for 30 minutes. The man down function* automatically sends an emergency signal when the transceiver is left in a horizontal position. The lone worker function also can transmit an emergency signal when the radio is not operated for a preset period. These emergency signals can be sent with GPS position data* to alert your co-workers or dispatch of any potential trouble.

Icom IC-F326 DS - IC-F426 DS - Spec Sheet

Description

• 512 memory channels with 128 zones
• 5W output power both in VHF and UHF • Built-in 2-Tone, 5-Tone and BIIS 1200*
• CTCSS/DTCS encoder/decoder*
• MIL-STD 810 G rugged construction
• 8 DTMF autodial memories
• Tactical group function
• Busy channel lockout, repeater lockout • Power-on password
• Time-out timer • Talk around function •Lowbatteryalert •Escalatingalarm
• Surveillance function
(* = Analogue mode only)

Icom IC-F326 DT - IC-F426 DT

Icom IC-F326 DT - IC-F426 DT

The IC-F3262D series provides protection against dust and water that is equivalent to IP67. The radio can withstand 1m depth of water for 30 minutes. The man down function* automatically sends an emergency signal when the transceiver is left in a horizontal position. The lone worker function also can transmit an emergency signal when the radio is not operated for a preset period. These emergency signals can be sent with GPS position data* to alert your co-workers or dispatch of any potential trouble.

Icom ICF326DT - ICF426DT - Spec Sheet

Description

• 512 memory channels with 128 zones
• 5W output power both in VHF and UHF • Built-in 2-Tone, 5-Tone and BIIS 1200*
• CTCSS/DTCS encoder/decoder*
• MIL-STD 810 G rugged construction
• 8 DTMF autodial memories
• Tactical group function
• Busy channel lockout, repeater lockout • Power-on password
• Time-out timer • Talk around function •Lowbatteryalert •Escalatingalarm
• Surveillance function
(* = Analogue mode only)

Icom IC-F1000 - F2000

Icom IC-F1000 - F2000

The F1000/F2000 Series is a sleek portable radio that fits nicely in your hand designed to be the go-to entry to mid-level radio. Three model choices, basic – no display, simple – display with simple keypad, and full – display and fully DTMF keypad, include an array of features such as a built-in motion sensor, channel announcement function, and a rugged waterproof & dustproof chassis. The radio series is ideal to meet the needs of a wide range of businesses such as those involved in education, hospitality, and retail.

Icom IC-F1000/F2000 - Spec Sheet

Description

Emergency (No ACK transmission)
Radio check (RX only)
Stun/Revive (RX only)
Transmit status messages (LCD types only)
100 alias table (LCD types only)

Additional features

Built-in voice scrambler
Channel announcement
8 DTMF autodial memories
"Shift key" function increases the number of programmable key assignments
Surveillance function
Escalating alarm

Icom IC-F1000 S - IC-F2000 S

Icom IC-F1000 S - IC-F2000 S

The IC-F1000/F2000 series provides class leading 1500 mW loud and clear audio with Icom custom high power handling capacity speaker. It offers a compact, waterproof durable design and is full of great features such as motion/stationary detection sensor, man down, voice scrambler and voice announcement functions. The radio is ideal for business and industry users who require economical value and reliability in a radio.

Icom IC-F1000-F2000 - Spec Sheet

Description

136–174, 335–380, 400–470, 450–512, 450–520 MHz versions
1500 mW large volume audio from Icom custom speaker
Improved sound clarity
Compact (52.2 × 111.8 × 24.5 mm; 2.1 × 4.4 × 1.0 in) and lightweight (240 g; 8.5 oz with BP-279)
IP67 waterproof and dust-tight protection
Tested to 12 categories of MIL-STD-810-G environmental tests
DTMF autodial memories
A 16-position rotary selector and ON/OFF volume knob
“Shift key” function increases the number of programmable key assignments
Up to 14 hours of operating time with supplied BP-279 battery pack
Eight characters alphanumeric display (Ten-keypad/simple keypad versions)
Three colour LED

Icom IC-F1000 T - IC-F2000 T

Icom IC-F1000 T - IC-F2000 T

The IC-F1000/F2000 series provides class leading 1500 mW loud and clear audio with Icom custom high power handling capacity speaker. It offers a compact, waterproof durable design and is full of great features such as motion/stationary detection sensor, man down, voice scrambler and voice announcement functions. The radio is ideal for business and industry users who require economical value and reliability in a radio.

Icom IC-F1000-F2000 - Spec Sheet

Description

136–174, 335–380, 400–470, 450–512, 450–520 MHz versions
1500 mW large volume audio from Icom custom speaker
Improved sound clarity
Compact (52.2 × 111.8 × 24.5 mm; 2.1 × 4.4 × 1.0 in) and lightweight (240 g; 8.5 oz with BP-279)
IP67 waterproof and dust-tight protection
Tested to 12 categories of MIL-STD-810-G environmental tests
DTMF autodial memories
A 16-position rotary selector and ON/OFF volume knob
“Shift key” function increases the number of programmable key assignments
Up to 14 hours of operating time with supplied BP-279 battery pack
Eight characters alphanumeric display (Ten-keypad/simple keypad versions)
Three colour LED

Icom IC-F3202 D Ex - IC-F4202 D Ex

Icom IC-F3202 D Ex - IC-F4202 D Ex

The IC-F3202DEX series provides rugged protection against dust and water that
is equivalent to IP67. The IC-F3202DEX series can withstand 1m depth of water
for 30 minutes and its dust-tight construction shuts out powder dust, sand and
other objects.

Icom IC-F3202 DEX & IC-F4202 DEX - Spec Sheet

Description

16 memory channels with channel announcement function
Built-in 2-Tone, 5-Tone, CTCSS and DTCS
BIIS 1200 PTT ID transmission
Voting Scan
DTMF autodial
Three programmable buttons (including emergency red button)
Low electrical resistivity body; Carrying case is not required
19.5–21 hours* operating time with BP-277EX
* Tx: Rx: Standby=5:5:90. Power save on.
Optional waterproof speaker-microphone, HM-203EX

MOBILE

Icom IC-F5022 - F6022

Icom IC-F5022 - F6022

The IC-F5022/F6022 professional mobile transceiver series is the successor to Icom's successful IC-F110/F210 series. The IC-F5022/F6022, retains the features of its predecessor while providing additional features found on higher end models. New signalling and scanning features give the user more flexibility by being compatible with existing radios. High-end features and ease of operation make these new radios suitable for a variety of markets including transport, agriculture & security, etc.

Icom IC-F5022/F6022 - Spec Sheet

Description

- Embedded ESN (Electronic serial number) 
- BIIS PTT ID transmission
- ±2.5ppm frequency stability both in VHF (136–174MHz) and UHF (400–470MHz)
- 8 DTMF autodial memories
- Improved CTCSS/DTCS decode speed

Icom IC-F5012 - F6012

Icom IC-F5012 - F6012

The IC-F5012 mobile transceiver series is the successor to Icom’s best selling IC-F110S series and is designed as a simplified counterpart to Icom’s IC-F5022 series. This series has many attractive features and an uncomplicated LED display that makes it ideally suited to small to mid-sized radio systems such as taxi operators, construction companies, security firms and farmers.

Icom IC-F5012/F6012 - Spec Sheet

Description

Entry level mobile with a very competitive price
Simple operation with 4 programmable buttons
VHF (IC-F5012) & UHF (IC-F6012) versions available
MIL-STD-810-F rugged body
Enhanced scanning features
Multiple signalling modes built-in 5-Tone, CTCSS, DTCS, MDC 1200* and BIIS 1200* (* Limited functions only)
4W (typ.) front mounted speaker and independent volume knob
2-year warranty on the transceiver, 1-year warranty on accessories

Icom IC-F5123 - F6123

Icom IC-F5123 - F6123

The IC-F5123D series provides NXDN™, CAI-based IDAS digital mode operation. It is also compatible with IDAS multi-site conventional and IDAS single-site trunking.

Icom IC-F5123/F6123 - Spec Sheet

Description

• IDAS™ conventional and IDAS™ single-site trunking compatible (NXDN™ CAIbased)
• Digital functionality built-in. No option unit required
• Max. 128 channel memory channels with 8 zones
• 8 character alphanumeric display
• Multiple analog signalling modes built-in
2-Tone^, 5-Tone^, CTCSS^, DTCS^, MDC 1200*^ and BIIS 1200*^
(* Limited functions only, ^ Analogue mode only)
• 4W (typ.) front mounted speaker and independent volume knob
• Talk back function and call mode selection
• Optional OPC-2078 D-SUB 25-pin ACC cable for GPS receiver connection
• MIL-STD-810-F rugged body

REPEATER

Icom IC-FR5000 - IC-FR6000

Icom IC-FR5000 - IC-FR6000

The Icom IC-FR5000 (VHF) and Icom IC-FR6000 (UHF) repeaters feature best-in-class digital (or analog) performance for selectivity and intermodulation rejection. High-efficiency functionality improves the quality of the repeater service, even under congested band conditions. The Icom IC-FR5000 / IC-FR6000 base repeater models are designed with enough internal space for installing another RF unit, while LEDs on the front panel show both channel conditions. The 12-digit dot-matrix display, five programmable buttons, 32 memory channels, and an internal speaker allow you to use the Icom IC-FR5000 / IC-FR600 as simple base stations or repeaters.

Icom IC-FR5000/FR6000  - Spec Sheet

Description

IDAS™ multi-site conventional systems
Multi-site conventional systems are possible with IDAS LINQ. Choose from the following configurations: LINQREPEAT, LINQREPEAT+, LINQVOTE, and LINQVOTE+.

MultiTrunk now available
IDAS multi-site operation has now expanded to trunking! Add a UCFR5000 and the new CF-FR5000MT card and many IDAS trunking sites can be interconnected to create a large roaming coverage area using IP.|

MultiTrunk Benefits:
Scalable from 1 channel to 30 channels per site, up to 16 sites
Effective operations with all channels used to transmit voice or data payload, priority monitoring for emergency interrupt, and polite roaming while conversations are occurring
All the features of digital radios, like text, GPS and group/individual calls available in multi-site trunking
Best value on the market for a multi-site trunking system
Double your channel capacityDouble your channel capacity
IDAS doubles the capacity of the current 12.5kHz channel allocation. Icom allows you to meet any narrow banding requirements today and provides a solution to any future spectrum deficiencies.

Digital/analog mixed mode operation
The IC-FR5000 series can receive both analog and digital signals on a single channel. You can partially introduce the IDAS system while using the existing analog radios in a system. The IDAS system allows you to scale migration to narrowband digital at your own pace and need.

Improved audio quality
The IDAS system occupies only 6.25kHz spacing per channel. With the improved sensitivity of narrowband communications, increased communication greater than 12.5kHz analog mode can be achieved. The IDAS system uses the AMBE+2™ codec, which provides clear audio and simultaneous data communication.

Network interface*
The IDAS repeater has a network interface* and can be connected to a LAN or the Internet via Ethernet cable. Communication range is vastly extended by the Internet connection and eliminates the need for expensive leased lines. When connected to a PC via a LAN or the Internet, you can remotely maintain the repeater configuration remotely from your PC. * Option (Available in the future)

Digital trunking capability*
The repeater will also have digital trunking capability in the near future. This will allow you further effective channel management by sharing a minimum of channels with a large number of users. * Some features are planned and released in the future.

19-inch rack mount 2U height low profile design
The IC-FR5000 series uses only 2U height. This low profile configuration allows you to stack multiple units in an industry standard 19-inch rack and provides great space efficiency.

Two RF channel modules in one unit
Two RF modules* can be installed in a chassis to reduce installation space, while the RF modules can be programmed and operated independently. LEDs on the front panel show both channel conditions.
* Optional UR-FR5000/UR-FR6000 required.
50W output at 50% duty cycle,
25W 100% duty cycle operation
Employing a high stability ±0.5ppm oscillator and high performance power amplifier, the IC-FR5000 series provides a reliable 100% duty cycle operation at 25W output. When operated at the high power setting of 50W, the repeater operates with a 50% duty cycle.

Multiple CTCSS, DTCS tone and RAN code decode
The IC-FR5000 series decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code. This function is useful for sharing a channel with multiple groups and provides quiet stand-by while using other groups.

Superior receiver performance
The IC-FR5000 series has class leading receiver performance of selectivity and intermodulation rejection. It improves the quality of the repeater service even under congested band conditions.

D-SUB 25-pin accessory connector
The IC-FR5000 series has a programmable D-SUB 25-pin accessory connector for connecting various trunking controllers or external remote control devices. Also, modulation/ demodulation signals can be input/ output from the D-SUB connector.

Voice scrambler
The built-in inversion type* voice scrambler provides secure conversation as stadard. When a more secure system is required, the 32 coded non-rolling type voice scrambler UT-109R* and 1020 code rolling type UT-110R* are available as an option. In IDAS digital mode, a 15-bit encryption key provides over 32,000 scrambling codes.
*These voice scramblers (inversion type, UT-109R and UT-110R) are available with analog mode only.

Built-in audio compander*
The built-in audio compander improves the signal to noise ratio and provide clear audio.
*Analog mode only.

Other features
PTT priority setting (Local Mic., external PTT or repeater operation)
Built-in inversion type voice scrambler and optional voice scrambler UT-109R or UT-110R*
5-Tone and DTMF encoder/decoder* and CW ID transmitter
Analog wide/narrow (12.5/25kHz) channel spacing programmable*
Normal and priority scan
Convenient key assign stickers supplied
Beat cancel capability
Low voltage alert*
Quick and easy programming from a PC * For analog mode only

AIRBAND

PORTABLE

Icom A25 N - A25 C

Icom A25 N - A25 C

The simplified waypoint NAV guides you to a destination by using current position information from GPS (also GLONASS and SBAS). The waypoint NAV has two functions: Direct-To NAV and Flight Plan NAV. In the Direct-To NAV, the IC-A25N directly guides you to a specified waypoint. In the Flight Plan NAV, the transceiver guides you to a sequential series of waypoints. Up to 10 flight plans and 300 waypoints can be memorized in the IC-A25N. Position information imported from an Android/iOS device* can be used as a waypoint.

Icom A25 N - A25 C Spec Sheet

Description

IP57 dust-protection and waterproof construction
Operate with six AA size alkaline batteries with the BP-289 battery case
BNC antenna
121.5 MHz emergency key
Weather channels
Priority watch
VFO scan, memory channel scan, priority scan
ANL (Auto Noise Limiter) for noise reduction
Side tone function
Internal VOX capability
300 memory channels (in 15 memory groups) with 12 character names
8.33 kHz channel spacing

Icom IC-A6 E

Icom IC-A6 E

Simple one-handed operation is the most essential feature of the IC-A6. The well labelled, large keypad provides user-friendly operation. The large display shows both letters and numbers and is easy to see, making for fast frequency recognition. The display is backlit, and so is the keypad. The light stays on until you turn it off a very handy feature for flying at night.

Icom IC-A6 - Spec Sheet

Description

200 memory channels (20 Ch x 10 banks) with 6 character names
Dedicated 121.5MHz emergency key
Side tone function allows you to hear your own voice via an external aviation headset.
Optional Ni-Cd and Li-Ion battery packs
NOAA marine weather channels
Tag scanning and memory bank scanning
ANL (Auto Noise Limiter) for noise reduction
Low battery alert

Icom IC-A14

Icom IC-A14

700mW* loud audio
Because air band radios are usually operated in high-noise environments, it is essential for the radio to provide loud clear audio. The IC-A14/S series employs a BTL amplifier that doubles the audio output, offering loud and clear audio that'll cut through cabin or tarmac noise. (*internal speaker only)

Full keypad type or Simple keypad type
The IC-A14 full keypad type allows you to input the channel or frequency directly and has an exclusive button for the 121.5MHz emergency channel. The IC-A14 receives NAV and WX channels. The IC-A14S simple keypad type provides a simpler operation with a minimum of buttons that is suitable for ground crews.

Compact, lightweight and rugged body
The IC-A14/S series is compact (only 120.mm tall) and lightweight (approx. 350g including antenna and BP-232N). The water-resistant construction, equivalent to IPX4, provides reliable operation in wet conditions.

Large capacity Lithium-Ion battery pack
With the 2000mAh large capacity Lithium-Ion battery pack, BP-232N, the IC-A14/S series provides stable output power and 18 hours long (approx.) operating time*. The BP-261, battery case takes 6 AA (LR6) alkaline cells for convenient battery backup. * Typical operation, Tx:Rx: Stand-by=5:5:90.

200 channels with memory banks
A total of 200* memory channels can be named with an 8-character channel name for easy recognition. For fast and simple operation, these channels can be grouped into 10 memory banks*. 
*IC-A14 only. The IC-A14S has 100 memory channels and memory banks are not available.

Icom IC-A14 - Spec Sheet

Description

5W typ. (PEP), 1.5W (CW) output power
Side tone function allows you to hear your own voice via a third party aviation headset
LCD backlight for night time operation
ANL (Auto Noise Limiter) for noise reduction
Low battery indication and beep alert
Adjustable microphone gain setting
BNC type antenna connector 

Icom IC-A14S

Icom IC-A14S

700mW* loud audio
Because air band radios are usually operated in high-noise environments, it is essential for the radio to provide loud clear audio. The IC-A14/S series employs a BTL amplifier that doubles the audio output, offering loud and clear audio that'll cut through cabin or tarmac noise. (*internal speaker only)

Full keypad type or Simple keypad type
The IC-A14 full keypad type allows you to input the channel or frequency directly and has an exclusive button for the 121.5MHz emergency channel. The IC-A14 receives NAV and WX channels. The IC-A14S simple keypad type provides a simpler operation with a minimum of buttons that is suitable for ground crews.

Compact, lightweight and rugged body
The IC-A14/S series is compact (only 120.mm tall) and lightweight (approx. 350g including antenna and BP-232N). The water-resistant construction, equivalent to IPX4, provides reliable operation in wet conditions.

Large capacity Lithium-Ion battery pack
With the 2000mAh large capacity Lithium-Ion battery pack, BP-232N, the IC-A14/S series provides stable output power and 18 hours long (approx.) operating time*. The BP-261, battery case takes 6 AA (LR6) alkaline cells for convenient battery backup. * Typical operation, Tx:Rx: Stand-by=5:5:90.

200 channels with memory banks
A total of 200* memory channels can be named with an 8-character channel name for easy recognition. For fast and simple operation, these channels can be grouped into 10 memory banks*. 
*IC-A14 only. The IC-A14S has 100 memory channels and memory banks are not available.

Icom IC-A14S - Spec Sheet

Description

5W typ. (PEP), 1.5W (CW) output power
Side tone function allows you to hear your own voice via a third party aviation headset
LCD backlight for night time operation
ANL (Auto Noise Limiter) for noise reduction
Low battery indication and beep alert
Adjustable microphone gain setting
BNC type antenna connector 

Icom IC-A24E

Icom IC-A24E

Easy to use while flying

Simple one-handed operation is the most essential feature of the IC-A24E/A6E. The well labeled, large keypad provides user-friendly operation. The large display shows both letters and numbers and is easy to see, making for fast frequency recognition. The display is backlit, and so is the keypad. The light stays on until you turn it off a very handy feature for fl ying at night.

“Flip-flop” channel recall

The IC-A24E/A6E stores the last 10 channels used. You can easily recall those channels by pushing the “flip-flop” recall [Flip-flop]  buttons on the front panel. It is convenient for switching between several channels, such as NAV and COM channels.

VOR navigation*

The IC-A24E has VOR navigation functions. The DVOR mode shows the radial to or from a VOR station and the CDI mode shows the course deviation to/from a VOR station. You can also input your intended radial to/from the VOR station and show the course deviation on the display. * IC-A24E only

External DC power jack

An external DC power jack allows for operation with the wall charger, BC-167 or the cigarette lighter cable, CP-20. When the battery pack is installed, simultaneous charging during operation is also possible. In addition, an optional battery case, BP-208N, is available.

Icom IC-A24E - Spec Sheet

Description

8.33kHz channel spacing (Depending on version)
IPX4 water-resistant construction.
200 memory channels (20 Ch × 10 banks) with 6 character names
Dedicated 121.5MHz emergency key
Side tone function allows you to hear your own voice via an external aviation headset.
Tag scanning and memory bank scanning
ANL (Auto Noise Limiter) for noise reduction

MOBILE

Icom IC-A120

Icom IC-A120

Icom’s A120 air band mobile introduces two new features: Active Noise Cancelling (ANC) and Bluetooth® capabilities. The newly added built-in ANC reduces background noise and is effective in extremely noisy airport environments. The automatic noise limiter (ANL) reduces pulse-type noise such as engine ignition. Insert the optional UT-133 Bluetooth® unit and connect a third-party wireless Bluetooth® headset.

Icom IC-A120  - Spec Sheet

Description

A total of 200 memory channels with 12-character channel names
Both 12- and 24- volt systems compatible
8.33 kHz* and 25 kHz channel spacing
36W (P.E.P.) RF output power
Dual watch and priority scan functions
Power on password protection
PC programming capability
CI-V Commands for external control
VE-PG3 RoIP gateway for interconnecting with other radio devices

* Use of 8.33 kHz channel spacing is prohibited in Canada

Icom IC-A220

Icom IC-A220

Icom’s A220 panel mount transceiver is a popular fit with experimental and light sport pilots. This ground to air transceiver has the capability to work on both 8.33 kHz and 25 kHz channel spacing frequencies. It features the brightest OLED (Organic Light Emitting Diode) display on the market offering many advantages in brightness, vividness, high contrast, wide viewing angle and response time compared to a conventional display. The A220 also features a built-in 2 station intercom, 12 or 24 volts compatible, automatic squelch and GPS memory function.

Icom IC-A220 - Spec Sheet

Description

Dual watch and priority watch functions
One touch access to 121.5 MHz emergency frequency
Side tone function for monitoring your voice with a headset
ANL (Automatic noise limiter) function reduces pulse type noise
Remote control capability
PC programming capability
Dial lock and panel lock
Time-out-timer
D-SUB 25-pin connector and MIL-Spec M39029/63-368 compliant socket pins
Slim 33 mm (1.3 inch) height can be installed in a limited panel space
Two types of menu mode; settings menu and configuration menu
Both 13.8 V and 27.5 V electrical systems compatible

MARINE

PORTABLE

Icom IC-M24

Icom IC-M24

Icom pioneered the floating VHF marine radio and others followed. Setting a new trend yet again, The Icom IC-M24 Portable has a flashing light feature that activates when the radio hits the water, even if the power is off! If you drop this floating radio overboard, it’s easier to find than ever, day or night.

Icom IC-M24 - Spec Sheet

Description

Float ‘n flash*
With its innovate flashing red LED light, an overboard IC-M24 is easy to find, day or night. The light flashes even if the radio is turned off.  * US patent pending.

AquaQuake draining function
The vibrating “buzz” sound clears water away from the speaker grill.

Smallest and lightest in the world
As a 5W VHF marine transceiver, the IC-M24 has the smallest and lightest body in the world.*  * As of December 2010, researched by Icom.

Energy-saving 3.7V circuitry
The IC-M24 is powered by the 3.7V Lithium-Ion battery pack, BP-266, to reduce the volume and weight of the radio. A newly developed PA circuit produces 5W (approx.) RF output and powerful 600mW (typ.) audio even at this low voltage, while saving battery consumption for 10 hours of operating time. *
Typical operation with Tx (Hi): Rx: standby=5:5:90.

Easy to see large LCD
The large, easy to see LCD (32 × 16 mm) offers a clear 2-digit channel number indication.

Built-in regular charger circuitry
Recharge the IC-M24 by plugging the wall charger directly into the radio. By eliminating exposed metal charging points, the IC-M24 is even more protected from water damage.

Volume loud and mute functions
The volume loud/mute functions temporarily change the volume to the maximum/minimum level with two touches of a button. Depending on the background noise level, you can easily change the volume level to capture the received message.

Other features
Submersible construction equivalent to IPX7 (1m depth for 30 minutes)
Dual/Tri-watch functions
4-step battery life indicator
Weather channel with weather alert (USA version)
One-touch access to Ch. 16
Auto scan function
Tag scan and Favorite channel functions

Icom IC-M34

Icom IC-M34

The Icom M-34 VHF Marine Transceiver offers a compact design with flexibility and ease of use to make marine communications a breeze. Icom has created the world's first floatable transceiver with this model. Should it be dropped in the water, the radio will float to the surface for easy retrieval and will continue to function as normal.

Icom IC-M34 - Spec Sheet

Description

Powerful 6W Output Power
Dual/Tri-watch Functions
4-step Battery Life Indicator
Weather Channel with Weather Alert
2-step Power Saver
Auto Scan Function
Instant Access to Ch 16 or Ch 9
AquaQuake Draining Function
Floatable Body Construction
Optional Waterproof Speaker Mic
Quick Channel Selection Functionality
Easy to See LCD Display

Icom IC-M36

Icom IC-M36

In marine environments there are many sources of noise that can affect the quality of your communications, such as engine noise, breaking surf and more. The IC-M36 automatically adjusts the outgoing voice and the incoming audio to compensate for the ambient noise level: whether you're in a loud environment or in a quiet area, the IC-M36 ensures your radio conversation is sent and received as clearly as possible.

Icom IC-M36 - Spec Sheet

Description

IP57 dust protection and waterproof (1 m; 3.3 ft depth of water for 30 minutes) construction
Dual/Tri-watch functions
Weather channel with weather alert
4-step battery life indicator
Auto scan function
Instant access to Ch 16 or Ch 9

Icom IC-M92 D

Icom IC-M92 D

The Icom IC-M92D Portable features the World’s First Active Noise Cancelling Handheld with DSC, GPS and MOB New Intuitive User Interface. The new menu system provides easy and intuitive operation. The bottom line of the display shows the software key functions which can be toggled with the left and right buttons.

Icom IC-M92D - Spec Sheet

Description

Float ’n Flash
The IC-M92D floats in the water in the face-up position and lets you know where it is with the LCD flashing and audible “beep alarm” feature as an aid for retrieval in the dark. The radio has IPX7 submersible protection. (1m depth for 30 minutes)

Active noise cancelling
The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. You will hear better, be heard better.

Built-in GPS
The built-in high sensitivity GPS receiver shows your current position and can be used for DSC calls. The compass function shows the direction you are going and the navigation function shows the direction and distance to a waypoint.

700mW loud audio
The IC-M92D uses a BTL (bridge-tied load) amplifier that doubles the audio output. The large speaker delivers 700mW of loud and intelligible audio even in noisy environments.

Built-in DSC for handheld
The IC-M92D has DSC functions which includes distress, individual, group, all ships, urgency, safety and DSC test calls.

Li-Ion battery pack, desktop charger and cigarette lighter cable supplied
The large, easy to see LCD (32 × 16 mm) offers a clear 2-digit channel number indication.

Additional features
Optional submersible speaker-microphone, HM-167
50 waypoint memories
MOB (Man Overboard) function to mark the current position
AquaQuakeTM draining function
Weather channel receive with alert function (USA version only)
Dual/Tri-Watch function for monitoring Ch. 16 and/or call channel
Battery indicator shows remaining battery power in 4 levels
Favourite channel function

Icom IC-M93 D

Icom IC-M93 D

In marine environments there are many sources of noise that can affect the quality of your communications, such as engine noise, breaking surf and more. The IC-M36 automatically adjusts the outgoing voice and the incoming audio to compensate for the ambient noise level: whether you're in a loud environment or in a quiet area, the IC-M36 ensures your radio conversation is sent and received as clearly as possible.

Icom IC-M93D - Spec Sheet

Description

IPX7 waterproof (1m depth of water for 30 minutes)
Navigation function from the current position to the specified waypoint
50 waypoint memories with an alphanumeric name for navigation
Dual/Tri-watch function for monitoring CH16 and/or call channel
Battery indicator shows remaining battery power in four levels
Favourite channel function for quick access to often used channels
AquaQuake™ draining function clears water away from the speaker grill
Support new VHF marine channel plan effective from January 1st, 2017
When the HM-165 is connected to the IC-M93D EURO, the HM-165 and the radio floats on the water

MOBILE

Icom IC-M323

Icom IC-M323

Icom IC-M323 Mobile common Marine Family User Interface provides simple operation for the boat owner. A rotary selector, directional keypad provides intuitive operation. The high definition dot-matrix display allows all information to be clearly viewed.

Icom IC-M323  - Spec Sheet

Description

Built-in Class D DSC
The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.

Common NMEA Interface
When connected to an external GPS receiver, current position and time are shown on the IC-M323’s display. When receiving DSC information from another vessel, the IC-M323 can transfer it to a navigational device via NMEA 0183 connectivity.

Compatible with MA-500TR
Class B AIS Transponder The IC-M323 can be integrated with the MA-500TR Class B AIS Transponder allowing
you to transmit DSC individual calls to a selected vessel instantly without manual MMSI entry; very handy if you
are waiting to contact vessels on the AIS screen, an essential safety feature in an emergency.

IPX7 Waterproof Protection
The IC-M323 withstands submersion in up to 1.0m depth of water for 30 minutes. It is equivalent to the IPX7 standard.

Favourite Channel Function
This function allows for quicker channel selection. Set the “Tag” channel to the channels used most often. When pushing the up/down buttons on the hand microphone, only the tagged channels are selected, while untagged channels are skipped.

Icom IC-M323 G

Icom IC-M323 G

Icom IC-M323G Mobile common Marine Family User Interface provides simple operation for the boat owner. A rotary selector, directional keypad provides intuitive operation. The high definition dot-matrix display allows all information to be clearly viewed.

Icom IC-M323G - Spec Sheet

Description

Built-in GPS Receiver (IC-M323G only)

The built-in GPS receiver shows your current position and time and can be used for DSC calls. GPS data source is selectable from internal and external GPS (and GPS OFF setting).

Intuitive User Interface

[New Intuitive User Interface] Icom's common Marine Family User Interface provides simple operation for the boat owner. A rotary selector and directional keypad provide intuitive operation. The high-definition dot-matrix display allows all information to be clearly viewed.

Built-in Class D DSC

The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.

IPX7 Waterproof Protection

The IC-M323/G withstands submersion in up to 1.0m depth of water for 30 minutes. It is equivalent to the IPX7 standard.

Common NMEA Interface

When receiving DSC information from another vessel, the IC-M323/G can transfer it to a navigational device via NMEA 0183 connectivity.

Compatible with MA-500TR Class B AIS Transponder

The IC-M323/G can be integrated with the MA-500TR Class B AIS Transponder, which allows you to transmit DSC individual calls to a selected vessel instantly without manual MMSI entry. It is very handy if you are waiting to contact vessels on the AIS screen - an essential safety feature in an emergency.

Favourite Channel Function

This function promotes quick channel selection. Set the "Tag" channel to the channels used most often. When pushing the up/down buttons on the hand microphone, only the tagged channels are selected, while untagged channels are skipped.

Other features

MarineCommander™ compatible
AquaQuake™ water draining function
Dual/tri-watch function for monitoring Ch.16 and/or call channel
Black and super white versions available
Supports new four-digit marine channels effective from January 1st, 2017

Copyright © 2019 Radio Trunk. All rights reserved.